Pubblicazioni scientifiche
I docenti afferenti al Dipartimento svolgono una intensa attività di pubblicazione scientifica, sia su riviste internazionali che su volumi che raccolgono atti di congressi. Sono inoltre membri di Editorial Board di riviste internazionali, Editor di Special Issue e revisori scientifici di riviste ad alto impatto bibliografico. Segue una lista delle pubblicazioni dei membri del Dipartimento.
-
Zambon, Y.; Laurita, R.; Contaldo, N.; Gherardi, M.; Colombo, V.; Bertaccini, A., Applicazioni di “plasma activated water” (PAW) a viti infette da fitoplasmi, in: VII Incontro Nazionale sui fitoplasmi e le Malattie da Fitoplasmi, Grugliasco (TO), 11-13 settembre 2017, 2017, pp. 28 - 28 (atti di: VII Incontro Nazionale sui fitoplasmi e le Malattie da Fitoplasmi, Grugliasco (TO), 11-13 settembre 2017) [Contributo in Atti di convegno]
-
Cecilia, Monticelli; Vincenzo, Grassi; Carla, Martini; Cristina, Chiavari; Giuseppe, Mavilia; Federica, Zanotto; Giulia, Masi; Elena, Bernardi; Andrea, Balbo, Protectiveness of different silane coatings on patinated ancient and modern bronzes: Part 1, in: Eurocorr 2017, European Federation of Corrosion (EFC), 2017, pp. 1 - 1 (atti di: Eurocorr 2017, European Federation of Corrosion (EFC) Event No. 417, Prague, Czech Republic, 3-7 September 2017) [Riassunto (Abstract)]
-
Tadeja, Kosec; Erika Švara Fabjan, ; Luka, Škrlep; Nina, Gartner; Elena, Bernardi; Maria Chiara Bignozzi, ; Cristina, Chiavari; Carla, Martini; Giulia, Masi; Jerome, Esvan; Claudie, Josse; Luc, Robbiola, Development of eco-friendly and non-hazardous outdoor bronze protective coatings, in: Eurocorr 2017, European Federation of Corrosion (EFC), 2017, pp. 1 - 1 (atti di: Eurocorr 2017, European Federation of Corrosion (EFC) Event No. 417, Prague, Czech Republic, 3-7 September 2017) [Riassunto (Abstract)]
-
Bianchini, A.; Guzzini, A.; Pellegrini, M.; Saccani, C., Earthquake and earth movement monitoring: The possibility to use Natural Gas distribution infrastructure, in: Bianchini, A. and Guzzini, A. and Pellegrini, M. and Saccani, C., Proceedings of the 22nd Summer School "Francesco Turco" - Industrial Systems Engineering, AIDI, 2017, 2017-September, pp. 143 - 149 (atti di: Summer School "Francesco Turco" - Industrial Systems Engineering, Palermo, 13-15 September 2017) [Contributo in Atti di convegno]
-
Bianchini, A.; Pellegrini, M.; Saccani, C., Wide use of sustainable energy from aquifers in Italy: Pilot plant design and implementation, in: Bianchini, A. and Pellegrini, M. and Saccani, C., Proceedings of the 22nd Summer School "Francesco Turco" - Industrial Systems Engineering, AIDI, 2017, 2017-September, pp. 305 - 311 (atti di: Summer School "Francesco Turco" - Industrial Systems Engineering, Palermo, 13-15 September 2017) [Contributo in Atti di convegno]
-
COSTANTINO CARLO Mastino, ; Luca, Barbaresi; Nicola, Granzotto; Roberto, Baccoli; Federica, Morandi, Comparative study of prediction methods and field measurements of the acoustic performances of buildings made with CLT elements, in: INTER-NOISE 2017 - 46th International Congress and Exposition on Noise Control Engineering: Taming Noise and Moving Quiet, «NOISE-CON PROCEEDINGS», 2017, pp. 3555 - 3564 (atti di: InterNoise17, Hong Kong CHINA, 27 and 30 August 2017) [Contributo in Atti di convegno]
-
Fragassa, Cristiano; Minak, Giangiacomo, Measuring deformations in a rigid-hulled inflatable boat, in: Fragassa, Cristiano, Key Engineering Materials, Trans Tech Publications Ltd, 2017, 754, pp. 295 - 298 (atti di: 16th International Conference on Fracture and Damage Mechanics, 2017, ita, 2017) [Contributo in Atti di convegno]
-
Vannucchi de Camargo, F.; Pavlovic, A.; Fragassa, C., Studio numerico degli impatti a bassa velocità sui biocompositi, in: Atti del 45° Convegno Nazionale AIAS 2017, Pisa, 2017, pp. 1 - 12 (atti di: 46° Convegno Nazionale Associazione Italiana Analisi delle Sollecitazioni, Pisa, 06-09 Settembre 2017) [Contributo in Atti di convegno]
-
Palanca, Marco; Ruspi Maria Luisa, ; Amicone, Alessio; Faldini, Cesare; Cristofolini, Luca, In vitro full-field strain distribution on human thoracolumbar spine segment subjected to flexion, in: In vitro full-field strain distribution on human thoracolumbar spine segment subjected to flexion, 2017, pp. 1 - 1 (atti di: 23rd Congress of the European Society of Biomechanics, July 2 - 5, 2017, Seville, Spain, Seville, Spain, 2-5 July 2 017) [Contributo in Atti di convegno]
-
Maria Luisa Ruspi, ; Marco, Palanca; Luigi La Barbera, ; Tomaso, Villa; Luca, Cristofolini, In vitro full-field strain investigation in intact spine and spinal fixator by means of DIC, in: In vitro full-field strain investigation in intact spine and spinal fixator by means of DIC, 2017, pp. 1 - 2 (atti di: The Italian Chapter of the European Society of Biomechanics, Rome, Italy, 28-29 September 2017) [Contributo in Atti di convegno]
-
Mara, Magni; JEAN PIERRE CAMPANA, ; Fabian, Ochs; GIAN LUCA MORINI,, NUMERICAL EVALUATION OF THE INFLUENCE OF SIZE AND POSITION OF RADIANT AND CONVECTIVE HEAT EMISSION SYSTEM ON THE MAIN INDOOR COMFORT PARAMETERS, in: Proceedings of 16th International Conference on Sustainable Energy Technologies (SET 2017), 2017, pp. 1 - 10 (atti di: SET, Bologna, 17-20/07/2017) [Contributo in Atti di convegno]
-
Bianchi, M.; Branchini, L.; De Pascale, A.; Melino, F.; Orlandini, V.; Peretto, A.; Archetti, D.; Campana, F.; Ferrari, T.; Rossetti, N., Energy Recovery In Natural Gas Compressor Stations Taking Advantage Of Organic Rankine Cycle: Design Analysis, in: ASME, Proc. of ASME Turbo Expo 2017, Vol. 9, ASME, 2017, pp. 1 - 14 (atti di: ASME Turbo Expo 2017, Charlotte, USA, June 26-30, 2017) [Contributo in Atti di convegno]
-
Bianchi, M.; De Pascale, A.; Melino, F.; Peretto, A.; Savic, S., Water Injection Evaporation in Frame 7EA Gas Turbine Wrapper, in: ASME, PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 3, 2017, pp. 1 - 12 (atti di: ASME Turbo Expo 2017, Charlotte, USA, June 26-30, 2017) [Contributo in Atti di convegno]
-
Ancona, M. A.; Branchini, L.; De Pascale, A.; Melino, F.; Di Pietra, B., Renewable Energy Systems Integration for Efficiency Improvement of a CHP Unit, in: Proc. of ASME Turbo Expo 2017, Vol. 3, 2017, pp. 1 - 12 (atti di: ASME Turbo Expo 2017, Charlotte, USA, June 26-30) [Contributo in Atti di convegno]
-
Piana, F.; Botti, L.; Casto, A.; Regattieri, A., Tackling the water scarcity problem in rural areas: Guidelines and best design practices, in: Proceedings of the Summer School Francesco Turco, AIDI - Italian Association of Industrial Operations Professors, 2017, 2017-1, pp. 319 - 325 (atti di: 22nd Summer School "Francesco Turco" - Industrial Systems Engineering 2017, Mondello Palace Hotel, Viale Principe di Scalea, ita, 2017) [Contributo in Atti di convegno]
-
Regattieri, Alberto; Piana, Francesco; Gamberi, Mauro; Galizia, Francesco Gabriele; Casto, Andrea, Reliability Assessment of a Packaging Automatic Machine by Accelerated Life Testing Approach, in: 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, Elsevier B.V., 2017, 11, pp. 2178 - 2186 (atti di: 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, Modena, 27-30 June 2017) [Contributo in Atti di convegno]
-
Bortolini, M.; Botti, L.; Gamberi, M.; Manzini, R.; Mora, C.; Regattieri, A., ENVIRONMENTAL ASSESSMENT OF AN INNOVATIVE PLANT FOR THE WASTEWATER PURIFICATION IN THE BEVERAGE INDUSTRY, in: Fertsch M., Stachowiak A., Mrugalska B., Oleskow-Szlapka J., Hadas L., Cyplik P., Golinska-Dawson P., 24TH INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH (ICPR 2017), Lancaster, Pennsylvania 17602 U.S.A., DEStech Publications, Inc., 2017, pp. 708 - 714 (atti di: 24TH INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH (ICPR 2017), POSNAN, POLAND, JULY 30-AUGUST 3, 2017) [Contributo in Atti di convegno]
-
Regattieri, A.; Casto, A.; Piana, F.; Faccio, M.; Ferrari, E., RELIABILITY PREDICTION OF A MECHANICAL COMPONENT THROUGH ACCELERATED LIFE TESTING, in: Fertsch M., Stachowiak A., Mrugalska B., Oleskow-Szlapka J., Hadas L., Cyplik P., Golinska-Dawson P., 24TH INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH (ICPR 2017), Lancaster, Pennsylvania 17602 U.S.A., DEStech Publications, Inc., 2017, pp. 726 - 731 (atti di: 24TH INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH (ICPR 2017), POSNAN, POLAND, JULY 30-AUGUST 3, 2017) [Contributo in Atti di convegno]
-
Sensini, A.; Focarete, M. L.; Gualandi, C.; Zucchelli, A.; Tozzi, G.; Boyle, L.; Reilly, G.; Cristofolini, L., Fabrication and characterization of electrospun scaffolds for tendon reconstruction, in: Proceedings ESB-ITA 2017, 2017, pp. 107 - 108 (atti di: VII Congress of European Society of Biomechanics-Italian Chapter, Roma, 28-29/09/2017) [Riassunto (Abstract)]
-
Sensini, A.; Focarete, M. L.; Gualandi, C.; Zucchelli, A.; Tozzi, G.; Boyle, L.; Reilly, G.; Cristofolini, L., Fabrication, characterization and high-resolution x-ray tomographic investigation of resorbable electrospun nanofibrous scaffolds for tendon regeneration, in: Programme ToScA 2017, 2017, pp. 27 - 27 (atti di: V Congress of Royal Microscopical Society ToScA-Tomography for Scientific Advancement, Portsmouth, UK, 6-8/09/2017) [Riassunto (Abstract)]