Pubblicazioni scientifiche

I docenti afferenti al Dipartimento svolgono una intensa attività di pubblicazione scientifica, sia su riviste internazionali che su volumi che raccolgono atti di congressi. Sono inoltre membri di Editorial Board di riviste internazionali, Editor di Special Issue e revisori scientifici di riviste ad alto impatto bibliografico. Segue una lista delle pubblicazioni dei membri del Dipartimento.

Cancella testo

Open Access

135 pubblicazioni

Shethia F.P.; Mecagni J.; Brusa A.; Cavina N.; Corti E., Performance Assessment of a Model-Based Combustion Control System to Decrease the Brake Specific Fuel Consumption, in: SAE Technical Papers, SAE International, 2023, 1, pp. 1 - 12 (atti di: SAE 16th International Conference on Engines and Vehicles, ICE 2023, ita, 2023) [Contributo in Atti di convegno]
Ludovico Ausiello; Martino Pani; Sebastian Duran; Michele Ducceschi, Variable bracing patterns to tune soundboards and membrane speakers, in: Proceedings of Acoustic 2023, 2023, pp. 1 - 8 (atti di: Acoustics 2023, Winchester, England, October 2023) [Contributo in Atti di convegno]
Viscione D.; Silvagni G.; Falfari S.; Bianchi G.M.; Ravaglioli V.; Mariani V.; Allocca L.; Montanaro A.; Meccariello G., Experimental-Numerical Analysis of Gasoline Spray-Wall Impingement at Ultra-High Injection Pressure for GCI Application, in: SAE Technical Papers, Warrendale, PA, Sae International, 2023, 1, pp. 1 - 10 (atti di: 16th International Conference on Engines & Vehicles, Capri, Italy, 10th - 14th September, 2023) [Contributo in Atti di convegno] Open Access
Valentino Solfrini, Giovanni Buonaiuto, Francesca Ghiaccio, Damiano Cavallini, Augusto Bianchini, Andrea Formigoni, Robot di mungitura e impronta carbonica della produzione di latte, in: Book of Abstracts, 2023(atti di: 7° Congresso Lattiero Caseario AITel. LATTE e DERIVATI: Una Filiera che si confronta con la sostenibilità, Cremona, 07/09/2023) [Poster]
Pellegrini M., Guzzini A., Saccani C.,, Environmental life cycle assessment of the innovative ejectors plant technology for sediment management in harbours, in: Book of Abstracts - 13th International SedNet Conference, 2023, pp. 99 - 99 (atti di: 13th International SedNet Conference - Sediment continuum: applying an integrated management approach, Lisbon, 6 September 2023) [Riassunto (Abstract)]
Valerio Antonio Arcobelli, Serena Moscato, Alberto Marfoglia, Filippo Nardini, Pericle Randi, Angelo Davalli, Antonella Carbonaro, Pierpaolo Palumbo, Lorenzo Chiari, Sabato Mellone, MOTU on FHIR: A preliminary strategy to enable interoperability for retrospective dataset standardization, in: 2023 IEEE EMBS Special Topic Conference on Data Science and Engineering in Healthcare, Medicine and Biology, New York, IEEE Computer Society, 2023, pp. 81 - 82 (atti di: IEEE EMBS International Conference on Data Science and Engineering in Healthcare, Medicine & Biology, St Julians, Malta, December 7-9, 2023) [Contributo in Atti di convegno] Open Access
Dan Ryals, Andrea; Bertolani, Giulia; Pollini, Lorenzo; Giulietti, Fabrizio, An Improved Stability Analysis for the $\mathcal{L}_{1}$ Adaptive Augmentation of a Baseline Controller, in: 9th 2023 International Conference on Control, Decision and Information Technologies, CoDIT 2023, 2023, pp. 327 - 332 (atti di: 9th International Conference on Control, Decision and Information Technologies, CoDIT 2023, Rome (Italy), 3-6 July 2023) [Contributo in Atti di convegno]
Angelini M.; Ida E.; Bertin D.; Carricato M.; Mantovani E.; Bazzi D.; Orassi V., An Underactuated Cable-Driven Parallel Robot for Marine Automated Launch and Recovery Operations, in: Proceedings of the ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference : IDETC-CIE 2023, New York, American Society of Mechanical Engineers (ASME), «INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES & COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE», 2023, 8, pp. 1 - 10 (atti di: ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2023, Boston, USA, 20-23 August 2023) [Contributo in Atti di convegno]
Christian Natale; Claudia Naldi; Matteo Dongellini; Gian Luca Morini, Long term performance analysis of a Dual-Source Heat Pump system by means of the Matlab/Simulink tool ALMABuild, in: 14th IEA Heat Pump Conference 2023 (HPC2023) Conference Proceedings, 2023, pp. 1 - 12 (atti di: IEA Heat Pump Conference 2023, Chicago (USA), 15-18 Maggio 2023) [Contributo in Atti di convegno]
Giulia Martino; Claudia Naldi; Matteo Dongellini; Gian Luca Morini, Experimental Study of A LTES Made By a Finned Heat Exchanger Immersed In a Paraffinic PCM, in: Proceedings of the 8th World Congress on Momentum, Heat and Mass Transfer (MHMT'23), 2023, pp. 1 - 5 (atti di: 8th World Congress on Momentum, Heat and Mass Transfer, Lisbona (Portogallo), 26-28 Marzo 2023) [Contributo in Atti di convegno]
Mottola G.; Martini A., A Novel Spatial 3-DoF Constant-Force Generator for the Static Balancing of Parallel Robots, in: Advances in Mechanism and Machine Science. IFToMM WC 2023., «MECHANISMS AND MACHINE SCIENCE», 2023, 147, pp. 754 - 765 (atti di: The 16th IFToMM World Congress [WC2023], Tokyo, Japan, 5-10 November 2023) [Contributo in Atti di convegno]
Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Paiardini, Luca; Scapecchi, Chiara, FATIGUE RESPONSE OF DMLS MANUFACTURED AlSi10Mg: INFLUENCE OF BUILD ORIENTATION, HEAT AND SURFACE TREATMENTS, in: J.F. Silva Gomes, EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS - Proceedings ICEM20 - 20th International Conference on Experimental Mechanics, Porto 2-7 July 2023, Porto, INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, 2023, pp. 1093 - 1094 (atti di: ICEM20 - 20th International Conference on Experimental Mechanics, Porto (Portogallo), 2-7 Luglio 2023) [Contributo in Atti di convegno]
Croccolo, Dario; De Agostinis, Massimiliano; Fini, Stefano; Mele, Mattia; Olmi, Giorgio; Scapecchi, Chiara; Ciric-Kostic, Snezana; Bogojevic, Nebojsa; Soskic, Zlatan, AN EXPERIMENTAL STUDY ON HYBRID ADDITIVELY-MANUFACTURED MARAGING STEEL UNDER FATIGUE, in: J.F. Silva Gomes, EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS - Proceedings ICEM20 - 20th International Conference on Experimental Mechanics, Porto 2-7 July 2023, INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, 2023, pp. 1095 - 1096 (atti di: ICEM20 - 20th International Conference on Experimental Mechanics, Porto (Portogallo), 2-7 Luglio 2023) [Contributo in Atti di convegno]
Kuchar, M; Fiser, J; Oswald, C; Khol, M; Oswaldová, I; Simeunovic, G; Vyhlídal, T; Robbiola, L; Brunet, M; Balbo, A; Chiavari, C; Martini, C; Bernardi, E; Guilminot, E; Echinard, J, Hangar environment monitoring for corrosion risk assessment and aeronautical heritage protection, in: 2023 24th International Conference on Process Control (PC), 345 E 47TH ST, NEW YORK, NY 10017 USA, IEEE, 2023, pp. 256 - 260 (atti di: 24TH International Conference on Process Control, PC 2023, Strbske Pleso, Slovakia, 6-9 June 2023) [Contributo in Atti di convegno]
Ancona M.A.; Bianchi M.; Branchini L.; De Pascale A.; Melino F.; Ottaviano S.; Peretto A.; Poletto C., Preliminary Investigation of a Combined Heat and Power Reversible-Brayton System Integrated With a Renewable Power Source, in: Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, New York, American Society of Mechanical Engineers (ASME), 2023, 8, pp. 1 - 14 (atti di: ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, GT 2023, usa, 2023) [Contributo in Atti di convegno] Open Access
Ancona M.A.; Bianchi M.; Branchini L.; Catena F.; De Pascale A.; Ferrari F.; Melino F.; Peretto A., Preliminary Numerical Study of Methane-Hydrogen Co-Combustion Effects on Heavy-Duty Gas Turbines, in: Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, MaterialS Park OHIO, American Society of Mechanical Engineers (ASME), 2023, 8, pp. 1 - 11 (atti di: ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, GT 2023, Boston, 26-30 June 2023) [Contributo in Atti di convegno] Open Access
Scrosati, C.; Barbaresi, L.; Pettoni Possenti, V., On the reasons of the revision of ISO 16283-3: first results of measurement campaign on loudspeakers, in: European Acoustics Association, Proceeding of 10th Convention of the European Acoustics Association, 2023, 10, pp. 1 - 5 (atti di: Forum Acusticum 2023, Torino, Italia, 11-15 Settembre 2023) [Contributo in Atti di convegno]
Barbaresi, L.; Pettoni Possenti, V.; Scrosati, C., On the influence of reference reverberation time on façade sound insulation measurements, in: European Acoustics Association, Proceeding of 10th Convention of the European Acoustics Association, 2023, 10, pp. 7 - 13 (atti di: Forum Acusticum 2023, Torino, Italia, 11-15 Settembre 2023) [Contributo in Atti di convegno]
Barbaresi, L.; Brugnara, P.; Pettoni Possenti, V.; Speranza, A.; Sestigiani, L., On the laboratory study of junction in flanking transmission in timber buildings, in: European Acoustics Association, Proceeding of 10th Convention of the European Acoustics Association, 2023, pp. 1551 - 1555 (atti di: Forum Acusticum 2023, Torino, Italia, 11-15 Settembre 2023) [Contributo in Atti di convegno]
Di Bella, Antonino; Barbaresi, Luca; Possenti, Vincenzo Pettoni, Influence of dimensional and connection characteristics of CLT building elements on predictive calculations, in: International Institute of Noise Control Engineering, Proceeding of 52nd International Congress and Exposition on Noise Control Engineering, «NOISE-CON PROCEEDINGS», 2023, 268, pp. 4756 - 4762 (atti di: Inter-Noise 2023, Chiba, Japan, 20-23 Agosto 2023) [Contributo in Atti di convegno]