Pubblicazioni scientifiche

I docenti afferenti al Dipartimento svolgono una intensa attività di pubblicazione scientifica, sia su riviste internazionali che su volumi che raccolgono atti di congressi. Sono inoltre membri di Editorial Board di riviste internazionali, Editor di Special Issue e revisori scientifici di riviste ad alto impatto bibliografico. Segue una lista delle pubblicazioni dei membri del Dipartimento.

Cancella testo

Open Access

8064 pubblicazioni

A. Segalini; A. Talamelli, Main Instabilities of Coaxial Jets, in: Progress in Turbulence and Wind Energy IV, BERLIN, Springer, «SPRINGER PROCEEDINGS IN PHYSICS», 2012, pp. 139 - 142 (atti di: Progress in turbulence and wind energy IV : Proceedings of the iTi Conference in Turbulence 2010, Bertinoro, Forlì Cesena (Italy), 2010) [Contributo in Atti di convegno]
F. Ospitali; C. Chiavari; C. Martini; E. Bernardi; F. Passarini; L. Robbiola, The characterization of Sn-based corrosion products in ancient bronzes: A Raman approach, «JOURNAL OF RAMAN SPECTROSCOPY», 2012, 43, pp. 1596 - 1603 [Articolo in rivista]
Fabbri G; Greppi M; Lorenzini M, PVT WATER BASED PROTOTYPE CONSTRUCTION AND EXPERIMENTAL EFFICIENCY ANALYSIS FOR A PARTICULAR ITALIAN NORTH-EST LOCATION, in: Proceedings of 30th Heat Transfer Conference, BOLOGNA, Esculapio, 2012, pp. 301 - 306 (atti di: 30th Heat Transfer Conference,, Bologna, Italy, 25-27 June 2012) [Contributo in Atti di convegno]
Yang Y.; Morini G.L.; Lorenzini M., Experimental Analysis of Gas Micro-Convection Through Commercial Microtubes, «EXPERIMENTAL HEAT TRANSFER», 2012, 25, pp. 151 - 171 [Articolo in rivista]
F. Tornabene; A. Liverani; G. Caligiana, Static Analysis with Normal and Shear Stress Recovery for Anisotropic Doubly-Curved Shell Panels Using the Differential Geometry and the GDQ Method, in: International Conference on Mechanics of Nano, Micro and Macro Composite Structures, TORINO, A.J.M. Ferreira, E. Carrera (Editors), 2012, pp. 43 - 44 (atti di: International Conference of Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS2012) (http://paginas.fe.up.pt/~icnmmcs/proceedings.html), Politecnico di Torino, 18-20 June 2012) [Riassunto (Abstract)]
Clairbois J-P.; de Roo F.; Garai M.; Conter M.; Defrance J.; Oltean-Dumbrava C.; Fusco I., QUIESST: third-term progress report, in: Proceedings of Euronoise 2012, PRAGUE, European Acoustics Association, 2012, 1, pp. 1294 - 1299 (atti di: 9th European Conference on Noise Control, EURONOISE 2012, Prague, 10-13 June 2012) [Contributo in Atti di convegno]
Guidorzi P.; Klepácek J.; Garai M., On the repeatability of reflection index measurements on noise barriers, in: Proceedings of Euronoise 2012, PRAGUE, European Acoustics Association, 2012, 1, pp. 1314 - 1319 (atti di: 9th European Conference on Noise Control, EURONOISE 2012, Prague, 10-13 June 2012) [Contributo in Atti di convegno]
M. Bianchi; A. De Pascale; P. R. Spina, Guidelines for Residential Micro-CHP Systems Design, «APPLIED ENERGY», 2012, 97, pp. 673 - 685 [Articolo in rivista]
A. De Pascale; C. Ferrari; F. Melino; M. Morini; M. Pinelli, Integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle, «APPLIED ENERGY», 2012, 97, pp. 695 - 703 [Articolo in rivista]
E. Barbieri; A. De Pascale; C. Ferrari; F. Melino; M. Morini; A. Peretto; M. Pinelli, Performance evaluation of the integration between a Thermo-Photo-Voltaic generator and an Organic Rankine Cycle, in: PROCEEDINGS OF THE ASME TURBO EXPO 2012, NEW YORK, ASME, 2012, 3, pp. 939 - 948 (atti di: ASME Turbo Expo 2012, Copenhagen, Danimarca, 11-15 Giugno 2012) [Contributo in Atti di convegno]
L. CESCHINI; C. CHIAVARI; E. LANZONI; C. MARTINI;, Low-temperature carburised AISI 316L austenitic stainless steel: wear and corrosion behavior, «MATERIALS & DESIGN», 2012, 38, pp. 154 - 160 [Articolo in rivista]
L. CESCHINI; ALESSANDRO MORRI; ANDREA MORRI, A study on the relationship between solidification conditions and microstructural characteristics of a complex shaped A356 gravity die cast cylinder head, in: Conf. Proc. of the “5th Intern. Conf. High Tech Die Casting 2012 - Innovation, Perspectives & Challenges in Pressure Die Casting of Light Alloys, MILANO, AIM, 2012, pp. 1 - 12 (atti di: 5th Intern. Conference High Tech Die Casting 2012 - Innovation, Perspectives & Challenges in Pressure Die Casting of Light Alloys, Vicenza (Italy), 9-10 February 2012) [Contributo in Atti di convegno]
ANDREA MORRI; L. CESCHINI; ALESSANDRO MORRI; I. TODARO, Prediction of tensile properties of cast Al-Si-Mg automotive components, in: Conf. Proc. of the 5th Intern. Conf. High Tech Die Casting 2012 - Innovation, Perspectives & Challenges in Pressure Die Casting of Light Alloys, MILANO, AIM, 2012, pp. 1 - 8 (atti di: 5th Intern. Conference High Tech Die Casting 2012 - Innovation, Perspectives & Challenges in Pressure Die Casting of Light Alloys, Vicenza (Italy), 9-10 February 2012) [Contributo in Atti di convegno]
F. Rotundo; C. Martini; C. Chiavari; L. Ceschini; A. Concetti; E. Ghedini; V. Colombo; S. Dallavalle, Plasma arc cutting: Microstructural modifications of hafnium cathodes during first cycles, «MATERIALS CHEMISTRY AND PHYSICS», 2012, 134(2-3), pp. 858 - 866 [Articolo in rivista]
J. H. M. Fransson; A. Talamelli, On the generation of steady streamwise streaks in flat-plate boundary layers, «JOURNAL OF FLUID MECHANICS», 2012, 698, pp. 211 - 234 [Articolo in rivista]
R. K. Bhargava; L. Branchini; F. Melino; A. Peretto, AVAILABLE AND FUTURE GAS TURBINE POWER AUGMENTATION TECHNOLOGIES: TECHNO-ECONOMIC ANALYSIS IN SELECTED CLIMATIC CONDITIONS, in: Proceedings of TURBO EXPO 2012, NEW YORK, ASME, 2012, pp. 847 - 858 (atti di: ASME Turbo Expo 2012, Copenhagen, 11-15 Giugno, 2012) [Contributo in Atti di convegno]
F. Melino; M. Morini; A. Peretto;M. Pinelli; P.R. Spina, Compressor Fouling Modeling: Relationship Between Computational Roughness and Gas Turbine Operation Time, «JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER», 2012, 134, pp. 052401-1 - 052401-8 [Articolo in rivista]
G. Avanzini; F. Giulietti, Magnetic Detumbling of a Rigid Spacecraft, «JOURNAL OF GUIDANCE CONTROL AND DYNAMICS», 2012, 35, pp. 1326 - 1334 [Articolo in rivista]
A. Barletta; D. A. Nield, On the Rayleigh-Bénard-Poiseuille problem with internal heat generation, «INTERNATIONAL JOURNAL OF THERMAL SCIENCES», 2012, 57, pp. 1 - 16 [Articolo in rivista]
S. Manservisi; R. Scardovelli, Termoidraulica dei flussi bifase, BOLOGNA, Esculapio, 2012, pp. 320 . [Monografia/Trattato scientifico in forma di libro]