Pubblicazioni scientifiche

Croccolo, D; De Agostinis, M; Fini, S; Olmi, G, Special issue on new trends in mechanical design and product development, «PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE», 2022, 236, pp. 10633 - 10635 [Articolo in rivista] Open Access

Christian Natale, Claudia Naldi, Matteo Dongellini, Gian Luca Morini, Dynamic modelling of a dual-source heat pump system through a Simulink tool, in: Proceedings del 77° Convegno nazionale ATI, Bristol, IOP Publishing ltd., 2022, 2385, pp. 1 - 11 (atti di: 77° Convegno Nazionale dell'Associazione Termotecnica Italiana (ATI 2022), Bari, 12-14 Settembre 2022) [Contributo in Atti di convegno] Open Access

João Soares, Szabolcs Varga, Matteo Dongellini, Performance assessment of a solar/biomass hybrid heating and cooling system - results from a single-family house operational environment, in: Proceedings of EuroSun 2022 Conference, 2022, pp. 1 - 6 (atti di: EuroSun 2022 Conference, Kassel (Germania), 25-29 Settembre 2022) [Contributo in Atti di convegno]

D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic, EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE STRENGTH OF DMLS PRODUCED MARAGING STEEL, in: J.F. Silva Gomes, Shaker A. Meguid, Proceedings M2D2022, Porto, INEGI-FEUP, 2022, pp. 861 - 862 (atti di: 9th International Conference MECHANICS AND MATERIALS IN DESIGN, Funchal/Portugal, 26-30 Giugno 2022) [Contributo in Atti di convegno]

Matteo Dongellini, Robert Haberl, Lukas Omlin, Szabolcs Varga, Claudia Naldi, Gian Luca Morini, Annual Energy Performance of a Solar/Biomass HVAC System: Experimental Characterization through Concise Cycle Tests, in: Proceedings of EuroSun 2022 Conference, 2022, pp. 1 - 12 (atti di: EuroSun 2022 Conference, Kassel (Germania), 25-29 Settembre 2022) [Contributo in Atti di convegno]

D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic, EFFECT OF THE POSITION IN THE BUILD CHAMBER ON THE FATIGUE RESPONSE OF DMLS PRODUCED MARAGING STEEL, in: Zbigniew L. Kowalewski, Elżbieta A. Pieczyska, Book of Abstracts 19th International Conference on Experimental Mechanics, 2022, pp. 1 - 2 (atti di: 19th International Conference on Experimental Mechanics, Cracovia (Polonia), 17-21 Luglio 2022) [Contributo in Atti di convegno]

D. Croccolo, M. De Agostinis, S. Fini, G. Olmi, L. Paiardini, F. Robusto, S. Ciric Kostic, N. Bogojevic, FATIGUE STRENGTH OF AS FABRICATED DMLS PRODUCED 15-5 PH STAINLESS STEEL AND EFFECTS OF POST-MANUFACTURE TREATMENTS, in: Zbigniew L. Kowalewski, Elżbieta A. Pieczyska, Book of Abstracts 19th International Conference on Experimental Mechanics, 2022, pp. 1 - 2 (atti di: 19th International Conference on Experimental Mechanics, Cracovia (Polonia), 17-21 Luglio 2022) [Contributo in Atti di convegno]

Ancona, Maria Alessandra; Bianchi, Michele; Branchini, Lisa; Catena, Francesco; De Pascale, Andrea; Ferrari, Federico; Melino, Francesco; Peretto, Antonio, Optimized design and simulation of a hybrid storage system based on hydrogen as an energy carrier, in: E3S Web of Conferences, 2022, 334, pp. 1 - 8 (atti di: EFC21 - European Fuel Cells and Hydrogen Piero Lunghi Conference, online, dal 15 al 17 dicembre 2021) [Contributo in Atti di convegno] Open Access

A. Zanarini, On the approximation of sound radiation by means of experiment-based optical full-field receptances, in: Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, Leuven, Katholieke Universiteit Leuven Mecha(tro)nic System Dynamics (LMSD) division, 2022, pp. 2735 - 2749 (atti di: ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, Leuven, Belgio, 12-14/09/2022) [Contributo in Atti di convegno]

A. Zanarini, About the excitation dependency of risk tolerance mapping in dynamically loaded structures, in: Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, Leuven, Katholieke Universiteit Leuven Mecha(tro)nic System Dynamics (LMSD) division, 2022, pp. 3804 - 3818 (atti di: ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics, Leuven, Belgio, 12-14/09/2022) [Contributo in Atti di convegno]

Falaschetti M.P.; Zavatta N.; Rondina F.; Donati L.; Troiani E., Numerical Investigation of Al-Reinforced CFRP Composite under Low-Velocity Impact, in: Key Engineering Materials, 2022, 926 KEM, pp. 1959 - 1968 (atti di: 25th International Conference on Material Forming, ESAFORM 2022, Braga (Portugal), 27 April 2022 - 29 April 2022) [Contributo in Atti di convegno] Open Access

Negozio M.; Pelaccia R.; Donati L.; Reggiani B., FEM Analysis of the Skin Contamination Behavior in the Extrusion of a AA6082 Profile, in: Gabriela Vincze and Frédéric Barlat, Key Engineering Materials Vol. 926, Baech, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2022, 926, pp. 452 - 459 (atti di: 25th International Conference on Material Forming, ESAFORM 2022, Braga (Portugal), 27 April 2022 - 29 April 2022) [Contributo in Atti di convegno] Open Access

Di Donato S.; Donati L.; Negozio M., Copper Wire Multi-Pass Drawing: Process Modeling and Optimization, in: Gabriela Vincze and Frédéric Barlat, Key Engineering Materials Vol. 926, Baech, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2022, 926, pp. 499 - 510 (atti di: 25th International Conference on Material Forming, ESAFORM 2022, Braga (Portugal), 27 April 2022 - 29 April 2022) [Contributo in Atti di convegno] Open Access

Pelaccia R.; Negozio M.; Reggiani B.; Donati L., Assessment of the Optimization Strategy for Nitrogen Cooling Channel Design in Extrusion Dies, in: Gabriela Vincze and Frédéric Barlat, Key Engineering Materials Vol. 926, Baech, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2022, 926, pp. 460 - 470 (atti di: 25th International Conference on Material Forming, ESAFORM 2022, Braga (Portugal), 27 April 2022 - 29 April 2022) [Contributo in Atti di convegno] Open Access

Milan Sljivic; Stefan Wagner; Ana Pavlovic; Dragan Marinkovic, Metal Additive Manufacturing of End-Use Components and Parts: A Practical Overview, in: 25, Heidelberg, Springer, 2022, pp. 149 - 160 [Capitolo/Saggio in libro]

Pavlovic, A, Finite Elements Analysis of the Hyperelastic Impeller Rotating in the Self-Priming Pump, «JOURNAL OF APPLIED AND COMPUTATIONAL MECHANICS», 2022, 8, pp. 1103 - 1112 [Articolo in rivista]

Gandhi, Y.; Minak, G., A Review on Topology Optimization Strategies for Additively Manufactured Continuous Fiber-Reinforced Composite Structures, «APPLIED SCIENCES», 2022, 12, pp. 1 - 25 [Articolo in rivista] Open Access

Luzi, L; Carloni, A; Monari, E; Berselli, G; Vertechy, R, A new resonance-based design approach to reduce motor torque requirements in automated machinery, «INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY», 2022, 122, pp. 4353 - 4364 [Articolo in rivista] Open Access

Sirbu, ID; Bolignari, M; D'Avella, S; Damiani, F; Agostini, L; Tripicchio, P; Vertechy, R; Pancheri, L; Fontana, M, Adhesion State Estimation for Electrostatic Gripper Based on Online Capacitance Measure, «ACTUATORS», 2022, 11, pp. 1 - 15 [Articolo in rivista] Open Access

Marco Bovo; Niccolò Giani; Alberto Barbaresi; Laura Mazzocchetti; Luca Barbaresi; Loris Giorgini; Daniele Torreggiani; Patrizia Tassinari, Contribution to thermal and acoustic characterization of corn cob for bio-based building insulation applications, «ENERGY AND BUILDINGS», 2022, 262, pp. 1 - 15 [Articolo in rivista] Open Access