Pubblicazioni scientifiche

I docenti afferenti al Dipartimento svolgono una intensa attività di pubblicazione scientifica, sia su riviste internazionali che su volumi che raccolgono atti di congressi. Sono inoltre membri di Editorial Board di riviste internazionali, Editor di Special Issue e revisori scientifici di riviste ad alto impatto bibliografico. Segue una lista delle pubblicazioni dei membri del Dipartimento.

Cancella testo

Open Access

390 pubblicazioni

Garcia, D.; Palazzetti, R; Trendafilova, I.; Fiorini, C.; Zucchelli, A., Vibration-based delamination diagnosis and modelling for composite laminate plates, «COMPOSITE STRUCTURES», 2015, 130, pp. 155 - 162 [Articolo in rivista]
Giuliese, G.; Palazzetti, R; Moroni, F.; Zucchelli, A.; Pirondi, A., Cohesive zone modelling of delamination response of a composite laminate with interleaved nylon 6,6 nanofibres, «COMPOSITES. PART B, ENGINEERING», 2015, 78, pp. 384 - 392 [Articolo in rivista]
Trendafilova, Irina; Palazzetti, Roberto; Zucchelli, Andrea, Damage assessment based on general signal correlation. Application for delamination diagnosis in composite structures, «EUROPEAN JOURNAL OF MECHANICS. A, SOLIDS», 2015, 49, pp. 197 - 204 [Articolo in rivista]
Heidary, Hossein; Karimi, Navid Zarif; Ahmadi, Mehdi; Rahimi, Abdolreza; Zucchelli, Andrea, Clustering of acoustic emission signals collected during drilling process of composite materials using unsupervised classifiers, «JOURNAL OF COMPOSITE MATERIALS», 2015, 49, pp. 559 - 571 [Articolo in rivista]
Saghafi, H; Brugo, T.; Minak, G.; Zucchelli, A., Improvement the impact damage resistance of composite materials by interleaving polycaprolactone nanofibers, «ENGINEERING SOLID MECHANICS», 2015, 3, pp. 21 - 26 [Articolo in rivista]
Brugo, T.M.; Minak, G.; Zucchelli, A.; Saghafi, H.; Fotouhi, M., An Investigation on the Fatigue based Delamination of Woven Carbon-epoxy Composite Laminates Reinforced with Polyamide Nanofibers, «PROCEDIA ENGINEERING», 2015, 109, pp. 65 - 72 [Articolo in rivista]
Giampietro Fabbri, I Sageti: allevatori di vacche onomasti dell’Eurasia, «SCIENZE E RICERCHE», 2015, 13, pp. 39 - 56 [Articolo in rivista]
Piero Damerini; Riccardo Rossi; Luca Tassinari; Giampietro Fabbri, Analysis and optimization of a Puffer-type water heater, «ENERGY PROCEDIA», 2015, 81, pp. 1005 - 1012 [Articolo in rivista]
Semprini, Giovanni; Barbieri, Davide; Gober, Alessandro; Zandi, Francesca, Effect of occupant behavior and control systems on the reduction of energy needs of residential buildings, «ENERGY PROCEDIA», 2015, 78, pp. 633 - 638 [Articolo in rivista]
Mousli, Kindah; Semprini, Giovanni, Thermal performances of traditional houses in dry hot arid climate and the effect of natural ventilation on thermal comfort: A case study in Damascus, «ENERGY PROCEDIA», 2015, 78, pp. 2893 - 2898 [Articolo in rivista]
Penazzi, Stefano; Accorsi, Riccardo; Dunstall, Simon; Ferrari, Emilio; Manzini, Riccardo, Issues, challenges, models and tools for the design, management and control of job-shop manufacturing system in food industry, in: ASOR NATIONAL CONFERENCE 2015, Melbourne, 2015, pp. 1 - 1 (atti di: ASOR NATIONAL CONFERENCE 2015, Melbourne, 18 March 2015) [Contributo in Atti di convegno]
G. Semprini; F. Di Camillo, Aspetti tecnico-normativi della ventilazione nella riqualificazione energetica di edifici esistenti, «AICARR JOURNAL», 2015, 33, pp. 22 - 28 [Articolo in rivista]
Boselli, Marco; Colombo, Vittorio; Gherardi, Matteo; Laurita, Romolo; Liguori, Anna; Sanibondi, Paolo; Simoncelli, Emanuele; Stancampiano, Augusto, Characterization of a Cold Atmospheric Pressure Plasma Jet Device Driven by Nanosecond Voltage Pulses, «IEEE TRANSACTIONS ON PLASMA SCIENCE», 2015, 43, pp. 713 - 725 [Articolo in rivista] Open Access
Fantini, M; De Crescenzio, F.; Ciocca, L.; Persiani, F., Additive manufacturing to assist prosthetically guided bone regeneration of atrophic maxillary arches, «RAPID PROTOTYPING JOURNAL», 2015, 21, pp. 705 - 715 [Articolo in rivista]
Ponti, Fabrizio; Ravaglioli, Vittorio; De Cesare, Matteo; Stola, Federico, Torque and Center of Combustion Evaluation Through a Torsional Model of the Powertrain, «JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT AND CONTROL», 2015, 137, pp. 061005 - 061013 [Articolo in rivista]
Frau, Giuseppe; de Crescenzio, Francesca; Taurino, Damiano, Graphic visualization of probabilistic traffic/trajectory predictions in mobile applications. A first prototype and evaluations for general aviation purposes, in: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), Springer Verlag, 2015, 9171, pp. 154 - 164 (atti di: 17th International Conference on Human Computer Interaction, HCI International 2015, usa, 2015) [Contributo in Atti di convegno]
Emanuele Ghedini; Alberto Procacci, Effects of operating pressure on the cathode surface temperature and current profile in a plasma arc cutting torch, in: Proceedings of the ISPC 2015, 2015, pp. 1 - 4 (atti di: ISPC 22 - 22nd International Symposium on Plasma Chemistry, University of Antwerp, Stadscampus, Antwerp, Belgium, 5-10 July 2015) [Contributo in Atti di convegno]
Sara Bagassi; Francesca Lucchi; Franco Persiani, Aircraft Preliminary Design: a Windowless Concept, in: CEAS 2015, 5th CEAS (Council of the European Aerospace Societies) Air&Space Conference Proceedings, 2015, pp. 1 - 7 (atti di: CEAS 2015, 5th CEAS (Council of the European Aerospace Societies) Air&Space Conference, Delft, The Netherlands, 7-11 settembre 2015) [Contributo in Atti di convegno]
Gamberoni, A.; Donati, L; Reggiani, B.; Haase, M.; Tomesani, L.; Tekkaya, A.E., Industrial Benchmark 2015: Process Monitoring and Analysis of Hollow EN AW-6063 Extruded Profile, «MATERIALS TODAY: PROCEEDINGS», 2015, 2, pp. 4714 - 4725 [Articolo in rivista]
Cimarelli, A.; Cocconi, G.; Fronhapfel, B.; De Angelis, E., Spectral enstrophy budget in a shear-less flow with turbulent/non-turbulent interface, «PHYSICS OF FLUIDS», 2015, 27, pp. 1 - 16 [Articolo in rivista]