Pubblicazioni scientifiche
I docenti afferenti al Dipartimento svolgono una intensa attività di pubblicazione scientifica, sia su riviste internazionali che su volumi che raccolgono atti di congressi. Sono inoltre membri di Editorial Board di riviste internazionali, Editor di Special Issue e revisori scientifici di riviste ad alto impatto bibliografico. Segue una lista delle pubblicazioni dei membri del Dipartimento.
-
Fabrizio Ponti; Vittorio Ravaglioli; Enrico Corti; Moro Davide; Matteo De Cesare, Remote Combustion Sensing Methodology for Non-Intrusive Cylinder Pressure Estimation in Diesel Engines, in: 7th IFAC Symposium on Advances in Automotive Control, 20137th IFAC Symposium on Advances in Automotive Control, 2013, Laxenburg, IFAC, 2013, 7, pp. 353 - 359 (atti di: 7th IFAC Symposium on Advances in Automotive Control, AAC 2013, Tokyo, 4 September 2013 through 7 September 2013) [Contributo in Atti di convegno]
-
Fabrizio Ponti;Vittorio Ravaglioli;Enrico Corti;Davide Moro;Matteo De Cesare, Development of a Novel Approach for Non-Intrusive Closed-Loop Heat Release Estimation in Diesel Engines, in: SAE Technical Paper, WARRANDALE, PA, SAE INTERNATIONAL, 2013, pp. 1 - 11 (atti di: SAE 2013 World Congress and Exhibition, Detroit, MI, 16 April 2013 through 18 April 2013) [Contributo in Atti di convegno]
-
L. Botti; C. Mora; A. Regattieri, I rischi delle attività manutentive negli ambienti confinati. Un processo per una loro corretta valutazione, «MANUTENZIONE. TECNICA E MANAGEMENT», 2013, settembre 2013, pp. 28 - 29 [Articolo in rivista]
-
Cascini A.; Bortolini M.; Botti L.; Gamberi M.; Graziani A.; Mora C., Life Cycle Assessment of a commercial refrigeration system under different use configurations, in: Proceedings of the XVIII Summer School “Francesco Turco”, AIDI - Italian Association of Industrial Operations Professors, 2013, pp. 352 - 357 (atti di: XVIII Summer School “Francesco Turco”, Senigallia (AN), 11-13 September 2013) [Contributo in Atti di convegno]
-
M. Bortolini; M. Gamberi; A. Graziani; R. Manzini; C. Mora, Development of a thermostatic chamber for the performance testing of commercial refrigeration systems with traditional and low global warming potential fluids, in: Proceedings of the XVIII Summer School “Francesco Turco, 2013, pp. 1 - 7 (atti di: XVIII Summer School “Francesco Turco, Senigallia (AN), September 2013) [Contributo in Atti di convegno]
-
V Colombo;E Ghedini;M Gherardi;P Sanibondi, Evaluation of precursor evaporation in Si nanoparticle synthesis by inductively coupled thermal plasmas, «PLASMA SOURCES SCIENCE & TECHNOLOGY», 2013, 22, pp. 035010 - 035021 [Articolo in rivista]
-
Vittorio colombo, Il restauro di una lettera di Vittorio Alfieri a Carlo Scapin e altri materiali alfieriani, «SEICENTO E SETTECENTO», 2013, VIII, pp. 43 - 90 [Articolo in rivista]
-
Morini G.L.; Yang Y.; Brandner J.J., The design of gas-to-gas micro heat exchangers, «MÜHENDIS VE MAKINA», 2013, 54, pp. 159 - 170 [Articolo in rivista]
-
Yang Y.; Morini G.L.; Brandner J.J., Experimental Investigation of Thermal Performance of Gas-to-gas Micro Heat Exchanger as function of the Flow Arrangement, in: ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, ASME - American Society of Mechanical Engineers, 2013, 1, pp. 1 - 10 (atti di: ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo (Japan), June 16-19, 2013) [Contributo in Atti di convegno]
-
Yang Y.; Morini G.L.; Brandner J.J., Manifold optimization of gas-to-gas micro heat exchangers, in: 31st UIT(Italian Union of Thermo-fluid-dynamics) Heat Transfer Conference 2013, 2013, 1, pp. 1 - 10 (atti di: 31st UIT(Italian Union of Thermo-fluid-dynamics) Heat Transfer Conference 2013, Como, Italy, 25-27 June) [Contributo in Atti di convegno]
-
P. Vocale; G.L. Morini; M. Spiga, Effect of defrosting on the seasonal air heat pump performance, in: 31st UIT (Italian Union of Thermo-fluid-dynamics) Heat Transfer Conference 2013, 2013, pp. 1 - 10 (atti di: 31st UIT (Italian Union of Thermo-fluid-dynamics) Heat Transfer Conference 2013, Como, Italy, 25-27 June) [Contributo in Atti di convegno]
-
Yang Y.; Morini G.L.; Brandner J.J., Thermal performance of Gas-to-gas Micro Heat Exchangers, in: 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, 2013, 1, pp. 1 - 8 (atti di: 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Lisbon, Portugal, 16-20 June) [Contributo in Atti di convegno]
-
G.L. Morini, Main issues on the experimental analysis of forced convection in microchannels and micro heat exchangers, in: 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, 2013, 1, pp. 1 - 8 (atti di: 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Lisbon, Portugal, 16-20 June) [Contributo in Atti di convegno]
-
Vichi S; Infantino A ; Cicoria G; Pancaldi D; Marengo M; Lodi F ; Mostacci D, Development and characterization of a compact gamma-ray spectrometry system for quality control of PET radiopharmaceuticals, in: Annual Congress of the European-Association-of-Nuclear-Medicine (EANM), Berlin/Heidelberg, Springer Berlin Heidelberg, 2013, 40, pp. S177 - S178 (atti di: Annual Congress of the European-Association-of-Nuclear-Medicine (EANM), Lyon (Francia), 19-23 ottobre 2013) [Riassunto (Abstract)]
-
C. Perinelli; A. Infantino; G. Cicoria; D. Pancaldi; M. Marengo; D. Mostacci, Assessment of radionuclidic impurities in 2-[18F]fluoro-2-deoxy- D-glucose ([18F]FDG) synthesis with the GE FASTlab synthesizer, «CLINICAL AND TRANSLATIONAL IMAGING», 2013, 1, pp. S108 - S108 [Abstract in rivista]
-
Giulio Avanzini;Emanuele L. de Angelis;Fabrizio Giulietti, Acquisition of a Desired Pure-Spin Condition for a Magnetically Actuated Spacecraft, «JOURNAL OF GUIDANCE CONTROL AND DYNAMICS», 2013, 36, pp. 1816 - 1821 [Articolo in rivista]
-
S. Shahinfar;J. H. M. Fransson;S. S. Sattarzadeh;A. Talamelli, Scaling of streamwise boundary layer streaks and their ability to reduce skin-friction drag, «JOURNAL OF FLUID MECHANICS», 2013, 733, pp. 1 - 32 [Articolo in rivista]
-
M. Conconi;V. Parenti-Castelli, Functional modeling of human joints: A feasibility study for the KNEE, in: Proceedings of the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - IDETC/CIE 2013, Portland, Oregon, USA, ASME - American Society of Mechanical Engineers, 2013, pp. 1 - 6 [Capitolo/Saggio in libro]
-
Luca Cristofolini;Eva Angeli;Jan M. Juszczyk;Mateusz M. Juszczyk, Shape and function of the diaphysis of the human tibia, «JOURNAL OF BIOMECHANICS», 2013, 46, pp. 1882 - 1892 [Articolo in rivista]
-
Cristofolini Luca, Why Do We Need Both Numerical Models and in Vitro Experiments for the Pre-Clinical Validation of Prostheses?, «ORTHOPAEDIC PROCEEDINGS», 2013, 95-B, pp. 38 - 38 [Abstract in rivista]